Waffle pod and raft slabs for new estate builds, rebuilds and granny flats across the City of Liverpool — Austral and Leppington through to Casula, Moorebank and Green Valley.
Liverpool is two markets bolted together. The south-west — Austral, Leppington, Edmondson Park, Middleton Grange — is release land being built out block by block, and it is one of the highest-volume new-home corridors in the country.
The established east is a rebuild and granny flat market on much older stock, with the Georges River running through the middle of it. Between the two, the slab work here covers about every condition we pour into anywhere in Sydney.
Reactive shale across the established suburbs, engineered fill through the growth corridor, and soft river flats along the Georges River — three conditions, three different slabs.
The established suburbs sit on shale weathering to a reactive clay. Moderate to high reactivity is normal, and the engineer designs the beams around ground movement rather than around the building load.
New release land is cut and filled to level platforms before a builder arrives. Certified controlled fill can carry a slab; uncertified fill usually means piering to natural ground. Send the compaction report with the plans.
Along the river the ground turns to alluvial sand and silt, with old extraction land around Chipping Norton and flood planning levels over much of it. Piering and filling to a set floor level are both common here.
These are the conditions we typically strike across Liverpool — they are not a site classification. Your geotechnical report and structural engineer set the class and the slab design under AS 2870, and we quote and pour to whatever they specify.
Austral, Leppington and Edmondson Park release blocks for volume and custom builders. Quoted off the engineering, poured against your inspection and handover dates.
Older stock through Liverpool, Lurnea, Miller and Cartwright being replaced. We take the cleared pad through to a certified slab.
Common right across the established east. Access past the existing house decides the method, and we settle that at the site visit rather than on pour day.
Send us the engineering plans and we will confirm the system and quote it within 24 hours.
Polystyrene void formers in a grid, poured as one raft on top of the ground. Least excavation, least concrete, quickest to programme. The default on stable Class S and M sites.
Learn more →Solid concrete throughout with deeper stiffening beams dug into the ground. The system for reactive clay, fill and sloping sites where a waffle will not satisfy the engineer.
Learn more →A structural slab spanning between piers, walls or a lower level. Used on steep sites, over garages and basements, and for the upper floors of two-storey builds.
Learn more →We pour house slabs throughout the City of Liverpool, including:
Not listed? We cover the whole LGA — ask us about your suburb.
Email through the engineering drawings and the site classification, or just tell us the address and what you are building. We will come out and look at access, levels and the existing structures.
One price covering excavation, reinforcement, formwork, the pour and the paperwork. Pump access, rock and fill are priced in up front rather than raised as variations later.
We lock in a pour date around your inspections, set out to the engineer's drawings, pour and cure, and hand back a certified slab with the pour records for your building file.
All our concreting in the area: Concreters in Liverpool · Nearby: Fairfield, Campbelltown, Camden · All service areas
Send through your plans and we will have a fixed-price slab quote back to you within 24 hours.