Through-colour oxide concrete for driveways, pool surrounds, paths and patios across Greater and Western Sydney — managed start to finish by one team, one point of contact, accountable start to finish.
Coloured concrete uses iron oxide pigments blended directly into the concrete mix before it is poured. The colour runs through the full depth of the slab — not a surface coating, stain or paint that can peel or wear away. If the surface chips or scratches, you see the same colour all the way through.
Oxide pigments are UV-stable, meaning they resist fading far better than surface-applied dyes. The finish is available in a wide range of tones from earthy naturals through to deeper, bolder shades. Laying concrete across Greater and Western Sydney since 2012, one team manages the whole job from excavation to the final finish.
The full range of oxide tones we mix for coloured concrete across driveways, pool surrounds, paths and patios in Sydney.
Screen colours are a guide only — ask to see physical samples before you choose.
One consistent colour across your whole property — not just the driveway.
A coloured driveway lifts your home's street presence without the premium of exposed aggregate. Available in any oxide tone, finished plain, brushed or with cove edging. See our coloured concrete driveways →
A neutral tone — Sandstone, Limestone, Pebble — reads cool next to water and matches most pool finishes. The concrete is finished with a fine broom texture for slip resistance around the pool edge.
Side paths, garden walkways and front entries poured in the same oxide tone as the driveway for a clean, consistent look right around the property.
Alfresco areas, courtyards and entertaining spaces finished in a tone that ties in with your home's exterior. One colour, one team, one job — start to finish.
One team manages the whole job from excavation to the final finish — one point of contact, accountable start to finish.
We excavate to the required depth, remove the spoil, compact the subgrade and form up the slab. Any existing surface is broken out and taken away as part of the job.
The oxide pigment is blended into the concrete mix before the pour. We place reinforcement, pour the slab and consolidate the mix — the colour is through the full depth from the moment it goes down.
Once poured, the surface is trowelled, then finished plain, with a brushed texture or a cove edge — whichever finish you chose when we quoted. Sawcut joints are placed to control cracking.
The slab is cured properly to build strength, then sealed to protect the colour and surface. You can usually walk on it within a few days and use it fully after around 28 days.
Rather than guess at numbers online, we quote each job on the actual details of your site. Send us what you have in mind and we'll have a fixed-price quote back to you within 24 hours — no deposit to quote and no obligation.
Fixed-price quote on your driveway, pool surround, path or patio — within 24 hours.